Operating instructions, 9035 function submenu list and descriptions – Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter User Manual
Page 57
9035-OM (V4.4)
9035 PRODUCT MANUAL
3-13
Operating Instructions
9035 Function Submenu List and Descriptions
(continued)
• Apply Audio Channel Selection
Applies embedded and AES unity channel selection (as set in the above
drop-down lists). To apply the selections, click the Confirm button. When
Confirm is clicked, a Confirm? pop-up appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
For any selection following confirm, the destination channel controls are
default reset as follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
• Tie AES and Embedded Controls
When set to Enabled, gangs Gain, Phase, and Mute controls for
same-numbered Embedded and AES channels. Ganging is bilateral, with
embedded channel control settings affecting corresponding AES channel
controls, and vice-versa.
Table 3-2
9035 Function Submenu List — continued