Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 27)

9035-OM (V4.4) 9035 PRODUCT MANUAL 1-23
Introduction
Technical Specifications
Serial Digital Video Input (cont.) Equalization (SD):
1000 ft (305 m) Belden 1694A
Return Loss:
> 18dB at 5 MHz – 1.485 GHz
Analog Video Input Input Complement:
Separate component Y/composite, Pr/C, and Pb inputs
Input Type:
Differential; Common Mode Rejection = 5 VAC
Video Input Types:
HD: Component YPbPr and RGB SMPTE
SD: Composite, Component YPbPr (BetaCam™, MII™,
SMPTE/N10), RGB, and Y/C
Conversion Bit Depth:
12 bits
SD Color Separation:
5-Line Adaptive Comb or Notch Filter
Frequency Response (HD):
Y: 0 – 25 MHz ± 0.3 dB
Pb/B: 0 – 13.5 MHz ± 0.3 dB
Pr/R: 0 – 13.5 MHz ± 0.3 dB
Frequency Response (SD):
0 – 5.2 MHz ± 0.25dB
Differential Phase (SD):
< ± 0.4° typical
Differential Gain (SD):
< ± 0.4% typical
Analog Front-End Crosstalk:
Within noise floor measurement
Return Loss:
> 20 dB to 30 MHz
Serial Digital Video Outputs Number of Outputs:
Two HD/SD-SDI BNC per IEC 60169-8 Amendment 2
Impedance:
75
Ω
Table 1-2 Technical Specifications — continued
Item Characteristic