Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 99)

9035-OM (V4.4) 9035 PRODUCT MANUAL 3-55
Operating Instructions
Troubleshooting
Access Card Info panes for specific cards by clicking the card slot position in
the Card Access/Navigation Tree pane (as shown in the example in Figure
3-10).
Figure 3-10 Selecting Specific Cards for Card Info Status Display
By clicking on “Slot 0: MFC-8320-N”
in this example, Card Info is
displayed for frame Network
Controller Card
Status for selected card is
shown here (in this
example, connection OK
and “Fan Door Open”
alert)
Card general information
is displayed in lower
portion of Card Info pane
By clicking on “Slot 6:
CDI-9035 RCVR21” in this
example, Card Info is shown
for 9035 card in slot 6 Status for selected
card is shown here (in
this example, all
indications are OK)
Where applicable,
additional status is
displayed (as shown
in this example)