Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 83)

9035-OM (V4.4) 9035 PRODUCT MANUAL 3-39
Operating Instructions
9035 Function Submenu List and Descriptions
Tone Generator
This function sets the test tone frequency for each of four
tone generators (Tone Generator 1 thru 4).
• Frequency Selection Lists Selects the frequency for each of the four tone generators. 18 discrete
sine wave frequencies are available, ranging from 50 Hz to 16 kHz
(default frequency is 1.0 kHz).
Note: Unity-gain signal level is equivalent to -20 dBu.
Audio Mixing
This function provides down-mix audio routing selections
that multiplexes any five embedded audio channel or AES
channel sources into a stereo pair (Down Mix Left and Down
Mix Right)
• Down Mixer Selection
Separate drop-down lists for Left, Right, Center, Left Surround (Ls),
and Right Surround (Rs) inputs allow embedded, AES, or analog
channel audio source selection for each of the five inputs as shown below.
The example below shows selection from various sources and the
resulting stereo pair DM-L and DM-R. The two signals comprising the pair
can be routed and processed the same as any other audio input source.
Note: The stereo pair consists of basic L/R PCM signals with no
additional encoded information.
Table 3-2 9035 Function Submenu List — continued
•
•
•
•
•
•
• •
•
•
•
•
DM-L
L
R
C
Ls
Rs
DM-R
Embedded Ch 1
Embedded Ch 2
AES Ch 6
Embedded Ch 4
Embedded Ch 5
AES Ch 1 - Ch 16
AN-AUD Ch 1- Ch 8
Embed Ch 1 - Ch 16