Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 76)

3
9035 Function Submenu List and Descriptions
3-32 9035 PRODUCT MANUAL 9035-OM (V4.4)
Dolby Decoder
(9035-DEC only)
This function routes a Dolby
®
encoded AES pair or
embedded audio source to the Dolby
®
decoder, and
provides Dolby
®
configuration display and metadata
handling controls.
Note: • If necessary, see Dolby
®
E Processing and Routing Example on page 3-50 for an example of using
Dolby
®
decoding.
• Decoded channels shown in DashBoard™ correlate to typical channel designations as shown below.
Note that channel designations are a function of encoding. Based on encoding, actual channel
designations may vary from the examples shown here.
• See other important notes in this subsection regarding the proper use of metadata embedding tools
available with the decoder function.
• Input Select Using the Input Select drop-down list, routes an audio source containing
locked Dolby
® data to the Dolby ® decoder input from the choices below.
• AES Pair as Input AES Pair 1 thru AES Pair 8 range in Input Select drop-down list selects
an AES Pair (1 thru 8) to be the input for the Dolby
® decoder.
(In this example, AES Pair 1 is the input for the Dolby ® decoder)
• Dolby
®
Mode Display Shows specific bitstream information and Dolby
®
decoding type (Dolby
®
E
or Dolby ® Digital) for input applied to Dolby ® decoder.
(In this example, Dolby ® E 20-bit with 5.1+2 decoded channel
configuration is being decoded)
If selected input has invalid or missing Dolby ® data (such as if wrong
channels are applied to decoder), is displayed.
In this case, PCM data passes undecoded and is present on Dolby Ch 1
and Dolby Ch 2 channels.
Table 3-2 9035 Function Submenu List — continued
Decoder Channels E5.1+2 E7.1+2 E8x1
Ch 1 LF LF Ch 1
Ch 2 RF RF Ch 2
Ch 3 C C Ch 3
Ch 4 LFE LFE Ch 4
Ch 5 LS LS Ch 5
Ch 6 RS RS Ch 6
Ch 7 Aux 1 LB Ch 7
Ch 8 Aux 2 RB Ch 8
Mix 1 Lo Lo Mono Mix 1
Mix 2 Ro Ro Mono Mix 2
•
•
•