Cobalt Digital COMPASS 9035 Analog and SDI Input to SDI Output Converter - Manual (Page 92)

3
9035 Function Submenu List and Descriptions
3-48 9035 PRODUCT MANUAL 9035-OM (V4.4)
In the example here, Embedded Channels 1 thru 5 are de-embedded from the
input SDI data and routed to discrete AES channels 1 thru 5. Also, an internal
tone generator (TG1) and two analog inputs are routed to AES channels 6 thru
8, respectively. Figure 3-6 (sheet 2) shows the 9035 control settings (in this
example, using the DashBoard™ user interface) that result in this routing.
Figure 3-6 Audio Routing Example (Sheet 2 of 3)
AUD_ROUTE_EX1.PNG
AES Ch 1
AES Ch 2
AES Ch 3
AES Ch 4
AES Ch 5
AES Ch 6
AES Ch 7
AES Ch 8
Embed Ch 1
TG1
Embed Ch 2
Analog
Ch 1
SDI IN
Audio
De-Embed
Embed Ch 3
Embed Ch 4
Embed Ch 5
AN-AUD IN 1
AN-AUD IN 2
AES OUT 1
AES OUT 2
AES OUT 3
AES OUT 4
Analog
Ch 2
9035
Using the AES Audio Out Pairs 1-4
function, the Source selections
shown above route the selected
sources to discrete AES channels 1
through 8. These discrete outputs
are then available on the 9035 card
Rear I/O Module AES OUT 1 thru
AES OUT 4 BNC connectors.