PowerWalker VFI 10000TCP 3_1 - Manual (Page 34)

31
2) When completing the above action, UPS output voltage is still
present. In order to cut off the UPS output, simply cut off the utility
power supply. A few seconds later, LCD display shuts down and no
output voltage is available from the UPS output terminal.
5.3.4 Turning Off UPS Without Utility
1) To power off the UPS by pressing button continuously for more
than 3 second, and the buzzer will beep 3s. The UPS will cut off the
output at once.
2) A few seconds later, LCD shuts down and no voltage is available
from the UPS output.
5.4 LCD Operation
Except the default UPS status summary screen, the user could get
more useful information about UPS current status, detailed various
measurements, old events which ever occurred, UPS own
identification, and could change the settings to fit the user own
requirements, optimize the function of UPS.
5.4.1 The Main Menu
In the default UPS status summary screen, when pressing or
<1s, the detailed information about alarm, the system status, battery
would be shown.
In the default UPS status summary screen, when pressing >1s,
the display would enter main menu tree.
The main menu tree includes six branches: UPS status menu, event
log menu, measurement menu, control menu, identification menu,
setting menu.