2 connecting the panel, 3 powering the panel, Connecting the panel – SENA ProBee-ZS10 User Manual
Page 12: Powering the panel
Advertising
12
ProBee-ZS10 User Guide Rev.1.5
2.1.2 Connecting
the
panel
Please connect the device to your computer directly or using serial cable so AT commands can be sent
from the computer to the ZS10 adapter. The serial port of the panel is DB9 female as a DTE terminal.
Figure 2-2 Serial Cable Installation
2.1.3
Powering the panel
Once all the installations are completed, please plug in the power connector using the included DC power
adapter. Alternatively, the panel can be powered using battery pack.
Figure 2-3 Plugging DC Power Adapter
Advertising