6 at command examples, 1 network configuration, 1 coordinator – SENA ProBee-ZS10 User Manual
Page 55: 2 router, End-device, 4 sleepy end-device, 5 specifying network, At command examples, Network configuration, Coordinator
55
ProBee-ZS10 User Guide Rev.1.5
6
AT Command Examples
6.1 Network
configuration
6.1.1 Coordinator
AT+NODETYPE=1<CR>
# set node type (coordinator)
OK
#
Response
ATZ<CR> #
Apply
the
change
OK
#
Response
6.1.2 Router
AT+NODETYPE=2<CR>
# set node type (router)
OK
#
Response
ATZ<CR> #
Apply
the
change
OK
#
Response
6.1.3 End-device
AT+NODETYPE=3<CR>
# set node type (end-device)
OK
#
Response
ATZ<CR> #
Apply
the
change
OK
#
Response
6.1.4 Sleepy
End-device
AT+NODETYPE=4<CR>
# set node type (sleepy end-device)
OK
#
Response
ATZ<CR> #
Apply
the
change
OK
#
Response
6.1.5 Specifying
Network
AT+CHMASK=1000<CR>
# set 32-bit channel mask (ch: 12)
OK
#
Response
AT+PANID=0001
<CR>
# set 16-bit PAN ID (0001)
OK
#
Response
AT+EPID=0000000000000001<CR> # set 64-bit extended PAN ID (0000000000000001)
OK
#
Response
AT+ADDRDISCOVERY=1FEF<CR> # get 64-bit address using 16-bit short address