2 remote node, 3 clone, Remote node – SENA ProBee-ZS10 User Manual
Page 59: Clone
Advertising
59
ProBee-ZS10 User Guide Rev.1.5
6.5.2 Remote
Node
# upload firmware to a remote node using 64-bit long address. Note that UART
of local node should be set to 115200-8-N-1-N.
AT+BOOTLOAD=1,00019500002FDC40<CR>
Please start .ebl upload image ...
CCCCCCCCCCCCC
# upload ebl file by X-modem
Bootload Complete!
# succeed to upload
6.5.3 Clone
# clone the firmware of the local node to a remote node using 64-bit long
address. Note that UART of local node should be set to 115200-8-N-1-N.
AT+BOOTLOAD=2,00019500002FDC40<CR>
Start cloning ...
Bootload Complete!
# succeed to upload
Advertising