SENA ProBee-ZS10 - Manual (Page 13)

13 ProBee-ZS10 User Guide Rev.1.5
2.1.4 Attaching Battery Pack to ZS10
The ZS10 also supports optional standard battery pack (240mAh) and extended battery pack (900mAh).
Attach the battery pack to the ZS10 as shown below to power the ZS10 using the battery pack. To
recharge the battery pack, connect the external DC power adaptor as described in Section 2.1.3.
Figure 2-4 Attaching Battery Pack to ZS10
2.1.5 How to attach battery pack to ZS10
Step1. Remove two screws of ZS10 at the bottom and remove the cover.
Figure 2-5 Remove ZS10 bottom cover