SENA PS210W User Manual
Page 16
Advertising
16
Figure 2-4 Connecting a equipment to the PSx10W
2.2.3. Connecting the power
Connect the power cable to the Pro Series. If the power is properly supplied, the [Power] lamp will light
up solid red.
Figure 2-5 Connecting the power to the PSx10W
2.2.4. Accessing the System Console
There are several ways to access the Pro Series. These methods are dependent on whether the user
is located at a local site or a remote site, or whether the user requires a menu-driven interface, graphic
menu system or CLI (Command Line Interface).
Advertising