SENA PS210W - Manual (Page 41)

41
Port number
Max allowed connection
Inactivity timeout (0 for unlimited)
Socket ID (for outgoing connection)
Accept unlisted
UDP
Send unlisted
Modem emulation
Add or Edit a remote host
2
Host IP address
Host port
Backup host IP address
Backup host port
Remote host
1
Remove a remote host
Cryptography 3 SSLv3
Baud rate
Data bits
Parity
Stop bits
Flow control
Inter-character timeout (ms)
DTR behavior
Serial port
parameters
DSR behavior
Enable/Disable modem
Modem init-string
DCD behavior
Modem
Automatic release modem connection
Enable/Disable Port logging
Port log storage location
Port log buffer size
Port logging
Display port log
Enable/Disable port event handling
Notification interval
Enable/Disable Email notification
Subject of Email
Email
notification
Recipient’s Email address
Enable/Disable SNMP notification
Subject of SNMP trap
SNMP trap receiver’s IP address
SNMP trap community
SNMP
notification
SNMP trap version
Add/Edit an event keyword
Event keyword
Email notification
SNMP trap notification
Port command
Port event handling
Remove a keyword
Figure 4-1 shows the web-based serial port configuration screen. This serial port configuration main
screen summarizes port information. In this summary page, user can find which host mode, local port
number and serial port parameters are currently configured.
User can configure port parameters by clicking number or title of corresponding serial port.
1 TCP/UDP mode only.
2
A backup host and port are used when connection to main host is failed
3 TCP mode only