SENA PS210W - Manual (Page 33)

33
 POP-before-SMTP
These examples can be seen in Figure 3-12. Required parameters for each SMTP configuration
include:
 SMTP server IP address
 SMTP user name
 SMTP user password
 Device mail address
The device mail address specifies the sender’s email address for all log and alarm delivery emails .
SMTP servers often check only the sender’s host domain name of the email address for validity.
Consequently, the email address set for the device can use an arbitrary username with a registered
hostname (i.e. [email protected] or [email protected]).
The SMTP user name and SMTP user password are required when either SMTP with authentication
or POP-before-SMTP mode is selected.
Figure 3-11 SMTP Configurations
Figure 3-32 SMTP mode selection in SMTP configuration
3.6. IP Filtering
The Pro Series prevents unauthorized access using an IP address based filtering method. The users
can allow one of the following scenarios by changing the parameter settings: