SENA PS210W User Manual
Page 56
56
4.2.4. Remote host configuration
Remote host configuration is the list of hosts that will receive data from serial port of Pro Series when
there is data transmission from the serial port of the Pro Series.
In TCP mode, user can also configure secondary remote host (Backup host) that will receive data from
serial port if Pro Series fails to connect to primary remote host. If a connection to the primary remote
host can be made, Pro Series dose not send data to secondary remote host until connection to
primary remote host failed. And the maximum possible number of primary remote host is limited up to
4 remote connections.
In UDP mode, user can only configure a primary remote host because there is no way for Pro Series
to check status of primary remote host, so secondary remote host is meaningless.
The maximum number of remote host is limited up to 4 in the Pro Series. Figure 4-9 shows Remote
host configuration pages of the Web UI. (TCP mode)
User can also set any effective domain name as Host IP address in the Remote host configuration.
Figure 4-9 Remote host configuration