Adhoc configuration – SENA PS210W User Manual
Page 28
Advertising
28
Figure 3-6 WiFi Status
3.2.6. Adhoc configuration
This menu is enabled when the Network type is Adhoc mode. In order to use Adhoc mode, the device
to which the PSx10W and the PSx10W should share channel number, security configuration (Auth-
Encryption) and key. (When DHCP server is not running, you must use Static IP.)
Figure 3-7 Adhoc configuration
Country
Select country that is used now.
Channel
Select a channel for Adhoc connection
Network ID (SSID)
The SSID of the device to which the PSx10w connect
Auth-Encryption
The security configuration of the device to which the PSx10w connect
Key
The key of the device to which the PSx10w connect
Advertising