SENA PS210W User Manual

Page 52

Advertising
background image

52

AT or ATZ [CR][LF]

Initialize TCP socket and serial port

ATA/ [CR][LF]

Repeat last command

ATA
[Local port number]
[CR][LF]

Set TCP mode as TCP server mode. And then, set TCP state
as [Listen].
-. If the command parameter, Local port number is not
specified, the TCP session parameter, Local Port is used
instead.

ATAR
[Local port number]
[CR][LF]

This command is similar to ATA. The difference is that ATAR
forces the connection to be Raw TCP connection regardless
of Cryptography configuration and Default Data mode option.

ATAS
[Local port number]
[CR][LF]

This command is similar to ATA. The difference is that ATAS
forces

the

connection to

be

SSLv3 connection.

The

Cryptography configuration should be SSLv3. If not, this
command returns ERROR.

ATEn [CR][LF]

E, E0: Disable echo
E1: Enable echo

ATOn [CR][LF]

O, O0: Turn to data mode

ATQn [CR][LF]

Q, Q0: Response display on (default)
Q1: Response display off

ATVn [CR][LF]

V, V0: Response = <numeric code> [CR][LF]
V1 (default): Response = <verbose code> [CR][LF]

AT&Fn [CR][LF]

F, F0, F1: Restore default modem settings

ATHn [CR][LF]

H, H0: Disconnect current TCP connection

All the data will be cleared

H1: Keep the current TCP connection

If success,
OK [CR][LF]

If failure,
ERROR [CR][LF]

ATIn [CR][LF]

I, I0 : display “Sena Technologies, Inc.”
I3 : display model number
Others : display “OK”

<=

AT\Tn [CR][LF]

Set inactivity timer to n minutes
\T, \T0: inactivity timer disabled (default)

ERROR [CR][LF]
or
OK [CR][LF]

ATBn, ATCn, ATLn, ATMn,
ATNn, ATP, ATT, ATYn,
AT%Cn, AT%En, AT&Bn,
AT&Gn, AT&In, AT&Qn,
AT&V, ATMn, AT\An,
AT\Bn, AT\Nn, ATXn

None

OK [CR][LF]

ATS?, ATSn=x

Internal S-register can be set or read.
Default value s are shown on Table 4-4
Changed values are not preserved if the power is off.

<=

AT&Cn, AT&Wn, AT&Zn=x

Factory default response is ERROR.
This can be changed to OK by user configuration.
(Figure 4-8)

ERROR [CR][LF]
or
OK [CR][LF]

ATFn [CR][LF]

None

If n=1 OK [CR][LF]
Else ERROR [CR][LF]

ATWn

None

If n=0 OK [CR][LF]
Else ERROR [CR][LF]

Advertising