SENA PS210W - Manual (Page 31)

31
3.3.4. Management using SNMP
The Pro Series can be managed through the SNMP protocol using NMS (Network Management
System) or SNMP Browser. Before using the NMS or SNMP Browser, the user must set the access
control configuration properly so that the Pro Series permits host access where the NMS or SNMP
Browser is executed. Figure 3-8 shows a screen shot of a typical SNMP browser with MIB-II OIDs of
the Pro Series SNMP agent.
Figure 3-9 Browsing MIB-II OIDs of Pro Series SNMP agent using SNMP Browser
(AdventNet MibBrowser)
3.4. Dynamic DNS Configuration
When users connect the Pro Series to a DSL line or use a DHCP configuration, the IP address might
be changed whenever it reconnects to the network. It can therefore be very difficult to post all related
contacts for each new IP address. In addition, if the administrator only has access through the remote