3 configuring lineups, Hmis, see – GE Industrial Solutions Entellisys 4.0 System Administrator Manual User Manual
Page 38
Remote HMI Software
38
7
When logging into the system, the HMI will log an event “Switched to <Lineup Name>.” The HMI
will also log current time zones of the user’s PC running the Remote HMI software and the lineup
CPUs.
NOTE: Time zone differences between a remote HMI and the lineup will cause timestamp
differences between CPU and any local HMI events. Will not affect events on CPU
7.3 Configuring Lineups
To configure a Lineup, login to the HMI and from the main menu, select “HMI Preferences.” Click
on the “Config Lineup”
Figure 7-2 HMI Preferences
To add a lineup
1. Enter in the Lineup name (Must be unique and is limited to 30 characters)
2. Enter the Lineup Description (Limited to 250 characters)
3. Enter IP Addresses for both CPUA and CPUB (Must be unique)
4. Click the Startup Lineup to specify the default lineup
5. Click the “Add Lineup” button
To modify a lineup
1. Click on the desired lineup in the list and the Name, Description and IP addresses will
populate with the lineup information - edit the information