GE Industrial Solutions Entellisys 4.0 System Administrator Manual - Manual (Page 49)

Creating an archive 49
10
NOTE: The log files may be very large in size and are not required to recreate a system. It is
recommended to clear all three log files.
Figure 10-2 Archive File Selection screen
7. Once the desired files are selected, click OK to proceed (or click Cancel to exit).
8. Insert the USB flash memory device into the USB port.
9. Select the USB drive. Once a valid drive is selected, the Backup button is automatically
enabled.
10. Select the folder where you want the archive to be created.
11. Click the Backup button. A subfolder with the current date and time stamp is automatically
created. On successful completion of the backup, a message will display: “Backup has been
taken in the following directory <subfolder name>. Please Close the dialog”.