GE Industrial Solutions Entellisys 4.0 System Administrator Manual - Manual (Page 47)

47
10
10 System archives
A System Archive is a snapshot of the system's custom screens, configuration, and optionally
the event logs, fault reports, and waveforms. The archive is used to reconfigure a system,
putting it back to a known state. It is important to have a valid System Archive at all times.
An archive is created and shipped to the System Administrator when the switchgear ships from
the factory. The archive may be installed in a Remote HMI application allowing users to pre-
program protection settings prior to the switchgear arrival.
Archives are recommended at the following events:
• At switchgear startup, once the system settings have been programmed and tested.
• Periodically throughout the life of the switchgear – for example prior to summer shutdown
each year.
Figure 10-1 Archive screen