Other maintenance functions, 1 viewing and updating circuit breaker names, 13 other maintenance functions – GE Industrial Solutions Entellisys 4.0 System Administrator Manual User Manual
Page 65
Viewing and updating circuit breaker names
65
13
13
Other maintenance functions
13.1 Viewing and updating circuit breaker names
The HMI provides a tool to change the circuit breaker names corresponding to their location in
the switchgear.
To change the circuit breaker names
1. On the Main Menu, click the Maintenance button. The button will only be displayed if access
is allowed with the current login permissions.
2. Click the Breaker Names tab. A table will display as shown as in Figure 13-1.
Figure 13-1 Breaker Names screen
•
Breaker ID: Unique identifier for the circuit breaker. This is set by GE and cannot be changed.
•
Breaker Name: Unique name given to a circuit breaker (16 alphanumeric characters). This
may be set in the factory if information is provided from the customer. Otherwise, it should
be updated for ease of use with selection boxes.
•
Short Name: Unique short name given to a circuit breaker (8 alphanumeric characters). This
field is currently not used.