Par.o-56 preset refer- ence select, 2 parameter group en, Opceip ethernet/ip – GE Industrial Solutions AF-600 FP OPCEIP EtherNet_IP User Manual
Page 38
O-56 Preset Reference Select
Option:
Function:
Select control of the drive Preset Reference selection via the terminals (digital input) and/or via the net-
work.
[0]
Digit Input
Activates Preset Reference selection via a digital input.
[1]
Bus
Activates Preset Reference selection via the serial communication port or network option module.
[2]
Logic AND
Activates Preset Reference selection via the network/serial communication port, AND additionally via one
of the digital inputs.
[3] *
Logic OR
Activates the Preset Reference selection via the network/serial communication port OR via one of the
digital inputs.
NB!
This parameter is active only when par.O-01 Control Site is set to [0] Digital and control word.
6.2 Parameter Group EN-##
EN-00 IP Address Assignment
Option:
Function:
Selects the IP Address assignment method.
[0] *
Manual
IP-address can be set in par. EN-01 IP Address.
[1]
DHCP
IP-address is assigned via DHCP server.
[2]
BOOTP
IP-address is assigned via BOOTP server.
EN-01 IP Address
Range:
Function:
[000.000.000.000 - 255.255.255.255] Configure the IP address of the option. Read-only if par. EN-00 set to DHCP or BOOTP.
EN-02 Subnet Mask
Range:
Function:
[000.000.000.000 - 255.255.255.255] Configure the IP subnet mask of the option. Read-only if par. EN-00 set to DHCP or BOOTP.
EN-03 Default Gateway
Range:
Function:
[000.000.000.000 – 255.255.255.255] Configure the IP default gateway of the option. Read-only if par. EN-00 set to DHCP or BOOTP.
EN-04 DHCP Server
Range:
Function:
[000.000.000.000 – 255.255.255.255] Read only. Displays the IP address of the found DHCP or BOOTP server.
NB!
A power-cycle is necessary after setting the IP parameters manually.
EN-05 Lease Expires
Range:
Function:
[dd:hh:mm:ss]
Read only. Displays the lease-time left for the current DHCP-assigned IP address.
EN-06 Name Servers
Option:
Function:
IP addresses of Domain Name Servers. Can be automatically assigned when using DHCP.
[0]
Primary DNS
[1]
Secondary DNS
OPCEIP EtherNet/IP
37
6