Opceip ethernet/ip – GE Industrial Solutions AF-600 FP OPCEIP EtherNet_IP User Manual
Page 45
EN-95 Broadcast Storm Filter
Option:
Function:
Applies to par. EN-94; if the Broadcast Storm Protection should also include Multicast messages.
[0]
Broadcast only
[1]
Broadcast & Multicast
EN-98 Interface Counters
Option:
Function:
Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-shooting,
The parameter shows a sum of port 1 + port 2.
[0]
In Octets
[1]
In Unicast Packets
[2]
In Non-Unicast Packets
[3]
In Discards
[4]
In Errors
[5]
In Unknown Protocols
[6]
Out Octets
[7]
Out Unicast Packets
[8]
Out Non-Unicast Packets
[9]
Out Discards
[10]
Out Errors
EN-99 Media Counters
Option:
Function:
Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-shooting,
The parameter shows a sum of port 1 + port 2.
[0]
Alignment Errors
[1]
FCS Errors
[2]
Single Collisions
[3]
Multiple Collisions
[4]
SQE Test Errors
[5]
Deferred Errors
[6]
Late Collisions
[7]
Excessive Collisions
[8]
MAC Transmit Errors
[9]
Carrier Sense Errors
[10]
Frame Too Long
[11]
MAC Receive Errors
OPCEIP EtherNet/IP
44
6