GE Industrial Solutions AF-600 FP BACnet - Manual (Page 11)

Instructions:
- Remove the Keypad from the drive.
- Remove the frame located beneath and discard.
- Push the option into place. Two positions are possible, with cable terminal facing either up or down. The cable up position is often most suitable when
several frequency converters are installed side by side in a rack, as this position permits shorter cable lengths.
- Push the network option adaptor frame for the drive into place.
- Remove the Plug for the Drive Port and connect the Plug that is connected to the BACnet Option
- Replace the Keypad.
- Attach cable.
- Fasten the cable in place using cable holders. The drive top surface has pre-drilled threaded holes for attaching the cable holders to the unit.
AF-600FP BACnet
10
3