GE Industrial Solutions AF-600 FP BACnet - Manual (Page 46)

7.2 LED Status
Check the LEDs. The two bi-colour LEDs on the BACnet card indicate the status of BACnet communication.
LED 1: Net Status
Phases Status Bi-colour LED
Power On. Hardware Not OK Red
Self test Green
▂█▂█▂█▂█▂█
Running Module OK Green
██████████
Recoverable fault Red
Data exchange Device communicating. Green
LED 2 : Module Status
Phases Status Bi-colour LED
Power On. Unrecoverable fault Drive is not responding on in-
ternal bus Red
Self test configuration takes place Green
▂█▂█▂█▂█▂█
Running Module OK Green
██████████
Recoverable fault
• Configuration not OK e.g, P830
• Drive tripped
Red
AF-600FP BACnet
45
7