GE Industrial Solutions AF-600 FP BACnet - Manual (Page 40)

NB!
This parameter is active only when par. O-30 Protocol is set to [9] Drive Option.
BN-74 "I-Am" Service
Option: Function:
[0] * Send at power-up
[1] Continuously Choose whether the device should send the "I-Am" service message only at power-up or continuously
with an interval of approx. 1 min.
NB!
This parameter is active only when par. O-30 Protocol is set to [9] Drive Option.
BN-75 Initialization Password
Range: Function:
0* [0 - 0] Enter the password needed for execution of Drive Re-initialisation from BACnet.
NB!
This parameter is active only when par. O-30 Protocol is set to [9] Drive Option.
AF-600FP BACnet
39
6