GE Industrial Solutions OKCV3000CN DeviceNet - Manual (Page 17)

DeviceNet
-
the PLC will receive 8 words (i~ bytes) from the drive in the following order and manner:
-
word 0 is synchronous parameter 8200 of the drive
-
word 1 is synchronous parameter 8201 of the drive
-
word 2 is synchronous parameter 8289 of the drive
-
word 3 is asynchronous parameter 8314 of the drive
-
word 4 is asynchronous parameter 8305 of the drive
-
word 5 is asynchronous parameter 8302 of the drive
-
word 6 is asynchronous parameter 8248 of the drive
-
word 7 is asynchronous parameter 8572 of the drive
PLC DeviceNet CARD
DeviceNet Drop/Trunk Line
Figure 3.2.1. 1: Predefined master/ Slave Connection
DRIVE
LZ
HOW CONNECT THE DGFC