GE Industrial Solutions OKCV3000CN DeviceNet - Manual (Page 29)

DeviceNet
4.2.4. Consideration about the encoding examples
All previous encoding examples are supposed to be in hexadecimal format.
All previous encoding examples are supposed not to generate an error.
If an error exists the server returns:
Client Server
00,cc,00,ff
where:
00 is the destination MACID
cc is the code of service response
00 is the General Error Code
if is the additional error code
The following table lists the Error Codes that may be present in the General Error Code field of an Error
Response message.
02
->
Resource Unavailable
08
->
Service not supported
09
->
Invalid attribute value
GB
->
Already in requested mode/state
OC
->
Object state conflict
GE
->
Attribute not settable
OF
->
Privilege violation
1G
->
Device state conflict
11
->
Reply data too large
13
->
Not enough data
14
->
Attribute not supported
15 ->Too much data
16
->
Object does not exist
18
->
No stored attribute data
19
->
Store operation failure
iF
->
DGFC specific error
20-> Invalid parameter
28
->
Invalid Member ID
29
->
Member not settable
HOW TO CONFIGURE WITH DEVICENET
LIlA