GE Industrial Solutions SG Series 400 & 500 Installation Guide - Manual (Page 13)

Openings for input and output cable connections
2,050mm
80.71"
200mm
7.88" 1.97
"
40mm
1.58" 50m
m
33.4
7" 29.5
3"
750
mm
850
mm
SGS U_4 00- 500 _S2 _UP S vi ew top_ 01U S
Utility input
Output Load
Battery
Fig. 3.4.1-2 Opening on top of the cabinet for input and output cables
SG Series 400 & 500
openings are provided
on the top (*) and the
bottom (*) of the UPS
for the connection of
input and output
cables.
Pay attention to the
position of these
openings, when
choosing the
placement of the UPS.
These openings are
covered with a
protective plate.
Utility input
Output Load
Battery
7.88"
200mm
1.19"
700
mm
27.5
6"
850
mm 33.4
7"
80m
m 3.15
"
2,050mm
80.71"
30mm
SGS U_4 00-5 00_ S2_ UPS vie w b otto m_0
1US
*) Please remove
the plate before drilling
any holes.
Fig. 3.4.1-3 Opening on the bottom of the cabinet for input and output cables
Fixing of the UPS cabinet on the floor
The UPS cabinet is free standing and normally does not require to be bolted to the floor.
The UPS cabinet can be fixed however to the floor by bolting it with the supporting blocks to the
floor. See Fig. 3.4.1-4.
Ш 0.47305"
Ш 12mm
Front side
35mm
1.378"
1580mm
62.205"
35mm
1.378"
2.3
63"
60
m
m
28.
740"
730mm
2.
363"
60mm
=
=
30.0
40"
76
3m
m
575.5mm
22.658"
559.5mm
22.028" 33.268"
845mm
SGSU_400-500_S2_UPS view bottom_02US
Fig. 3.4.1-4 Fixing of the UPS cabinet on the floor
Modifications reserved Page 13/41
OPM_SGS_ISG_M40_M50_2US_V021.doc User Manual SG Series 400 & 500 UL S2