GE Industrial Solutions POWER LEADER PMCS Network Architecture Guide - Manual (Page 2)

GEH-6502
WARNINGS, CAUTIONS, AND NOTES
AS USED IN THIS PUBLICATION
WARNINGS
Warning notices are used in this publication to emphasize that hazardous voltages,
currents, or other conditions that could cause personal injury exist in this equipment or
may be associated with its use.
Warning notices are also used for situations in which inattention or lack of equipment
knowledge could cause either personal injury or damage to equipment.
CAUTIONS
Caution notices are used for situations in which equipment might be damaged if care is
not taken or which may cause communication errors to occur.
NOTES
Notes call attention to information that is especially significant to understanding and
operating the equipment.
This document is based on information available at the time of its publication. While
efforts have been made to ensure accuracy, the information contained herein does not
cover all details or variations in hardware and software, nor does it provide for every pos-
sible contingency in connection with installation, operation, and maintenance. Features
may be described herein that are not present in all hardware and software systems. GE
Industrial Systems assumes no obligation of notice to holders of this document with
respect to changes subsequently made.
GE Industrial Systems makes no representation or warranty, expressed, implied, or statutory, with
respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of
the information contained herein. No warrantees of merchantability or fitness for purpose shall apply.
©Copyright 2000- 2002 GE Company, all rights reserved.
POWER LEADER™, MicroVersaTrip ® , Spectra ® , and PowerBreak ® are trademarks of GE Company.
Modbus RTU ® is a registered trademark of AEG Schneider Automation.
Modbus ® is a registered trademark of Modicon Inc.