GE Industrial Solutions GERAPID 2607, 4207, 6007, 8007 with arc chutes 1X2, 1X4, 2X2, 2X3, 2X4 - Manual (Page 29)

2010-06-07 S47183e rev.03 Design and specifications are subject to change without notice 29
5.1 Safety distances.
Units call in mm (inches)
Legend for dimensional drawings
K Heat sink (for Gerapid 6007)
L All openings respectively free areas on the top of the cubical shall be not less than 50%
M Solenoid drive
P Diameter 9 mm [0,35 in], Countersunk screw M8
S Control box
Z Connector
Type Arc chute Main- Additional Deflector Safety distances / Insulated plates Safety distances / Earthed plates
Gerapid Connection isolation
E A B C D A B C D
2607 / 4207 1x2 all 10 (0,4) 700 (27,6) 150 (5,9) 150 (5,9) 120 (4,7) 1000 (39,4) 300 (11,8) 300 (11,8) 300 (11,8)
1x3 all 1) 1) 1) 1) 1) - - - -
1x4 all 150 (5,9) 700 (27,6) 150 (5,9) 150 (5,9) 120 (4,7) 1350 (53,2) 450 (17,7) 450 (17,7) 200 (7,9)
2x2 all 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) 1350 (53,2) 450 (17,7) 450 (17,7) 300 (11,8)
2x3 all 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2x4 H / H Plate 150 (5,9) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2x4 H / H Sidewalls 150 (5,9) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2x4 SEL / H Pan 150 (5,9) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
6007 1x2 V / V Heat sink 10 (0,4) 1000 (39,4) 300 (11,8) 300 (11,8) 180 (7,1) - - - -
1x3 1) 1) 1) 1) 1) 1) 1) - - - -
1x4 V / V Heat sink 150 (5,9) 1000 (39,4) 300 (11,8) 300 (11,8) 180 (7,1) - - - -
2x2 V / V Heat sink 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2x3 V / V Heat sink 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2x4 1) 1) 1) 1) 1) 1) 1) - - - -
8007 1x2 V / V Heat sink 10 (0,4) 1000 (39,4) 300 (11,8) 300 (11,8) 180 (7,1) - - - -
1x3 1) 1) 1) 1) 1) 1) 1) - - - -
1x4 1) 1) 1) 1) 1) 1) 1) - - - -
2) 2x2 V / V Heat sink 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 180 (7,1) - - - -
2) 2x3 V / V Heat sink 80 (3,15) 1000 (39,4) 180 (7,1) 180 (7,1) 300 (11,8) - - - -
2x4 1) 1) 1) 1) 1) 1) 1) - - - -
1) will be checked by customers order 2) acc. IEC 947-2 / ks-setting <12 kA H…Horizontal terminal V...Vertical terminal SEL...Current measurement system type SEL