GE Industrial Solutions GERAPID 2607, 4207, 6007, 8007 with arc chutes 1X2, 1X4, 2X2, 2X3, 2X4 - Manual (Page 50)

50 Design and specifications are subject to change without notice S47183e rev.03 2010-06-07
6.3.2 Electrical spare parts.
SU control PCB ALL N/A 128 700
ST control PCB ALL N/A 128 710 R01
UVR control PCB ALL N/A 128 710 R02
Interface plug External supply 24 V DC ±5% N/A 128 730 R01
PCMD 150 24 S24W-GE N/A 128 730 R02
PCMD 150 48 S24W-GE N/A 128 730 R03
PCMD 150 110 S24W-GE N/A 128 730 R04
Voltage converter
PCMA 150 70 S24W-GE N/A 128 730 R05
Standard NEKO PCB ALL N/A 128 750 R01
External NEKO 3C PCB ALL (obsolete) N/A 128 755 R01
External NEKO 4C PCB ALL (obsolete) N/A 128 755 R02
2607/4207 for 35 °C ambient N/A 128 785 R01
SEL control PCB
2607/4207 for 55 °C ambient N/A 128 785 R02
Auxiliary contact ALL N/A 174 349
Shunt trip 24 V DC ±5% ALL N/A 128 300 R01
Shunt trip 24 V DC ±20% ALL N/A 128 300 R02
Shunt trip 220 V DC ALL N/A 128 300 R03
Shunt trip 125 V DC ALL N/A 128 300 R04
Shunt trip 110 V DC ALL N/A 128 300 R05
Zero-voltage release ALL N/A 128 320 R01
Solenoid closing drive ALL N/A 128 070 1)
Connector X2 ALL N/A DFK-PC 4/12-GF-7.62
Connector X3, X4, X5 ALL N/A DFK-MSTB 2.5/15-GF
6.3.3 Recommend materials for selected works.
Standard parts, glues, pastes and greases are recommended for a maintenance stock.
Work to do. Spare parts.
Standard parts, materials and optional
components 1) .
Arc chute change Correct version of arc chute 128 550. Screws & Washers: M6x16 – 8.8 (ISO 4762); M6
toothed Rip-Lock, M6 conical spring (DIN 6796).
Arcing contact, arc
runners and protective
walls change.
Correct version of the service kit APN340110
consist of:
- Arcing contact;
-
Two arc runners;
-
Two protection sheets;
Optional:
-
Mini flexible braid 128 123;
Screws & Washers: M6x16 A4 (DIN 4762); M6
toothed Rip-Lock; Retain ring 4 (DIN 6799); Disc
spring 12.5 type A (DIN 2093)
Others: Conductivity grease Alvania RL3 by Shell.
Hint: Replace 128 123 or 128 150 only if recognize
these parts are broken. Replace all the parts from
service kit APN340110.
Wiring modifications
and control PCB
change.
Correct control PCBs or prepared wiring
harness.
Wires: 1 mm 2 , 1.5 mm 2 , 2.5 mm 2 ; 500 V polymer
insulation type up to +100 C; RoHS compliant;
black.
Plugs: MSTBC 2.5-5.08;
Terminations: Crimp MSTBC-MT 0.5-1.0; Crimp
MSTBC-MT 1.5-2.5; Receptacles 2.8 mm DIN 46247
with insulation cap;
Dumpers change.
-
Damper 128 018;
-
Damper 128 019;
Optional:
-
Spring bar cap 128 058;
Screws & Washers: M6x25, M6x30, M8x25, M8x30 -
8.8 (ISO14581);
Materials: Transparent silicone E-COLL 310ML; glue
Locktite 222; thermo paste WLP500;
Changing of zero
voltage release / shunt
trip
-
UV release 128 320;
-
Correct shunt trip;
Optional:
-
Spring bar cap 128 058;
Screws & Washers: M6x25, M6x30, M8x25, M8x30 -
8.8 (ISO14581); M4x10 – 8.8 (DIN912); M4 ribbed
lock washer (BN791 by Bossard);
Others: Polyamide clip bands 25x100mm.
Materials: Transparent silicone E-COLL 310ML; glue
Locktite 222; thermo paste WLP500; grease Beacon
EP3 by ESSO.
1) For substitute materials please consult GE representative.
128 018 128 019