Extron Electronics TPX 88 A User Guide - Manual (Page 18)

Introduction, cont’d
TPX 88 Matrix Switchers • Introduction 1-10
Global memory presets — 16 global memory presets are a time-saving feature that
lets you set up and store input/output configurations in advance and then
recall those configurations when needed with a few simple steps.
I/O grouping — Allows the matrix to be virtually divided into up to four smaller
sub-switchers, making installation and control easier. I/O grouping allows
specific outputs, such as those for a specific family of twisted pair receivers,
with a specific signal format, to be grouped together. Switching between I/O
groups is not possible from the front panel.
Rack mount — Rack mountable in any conventional 19" wide rack.
Front panel security lockout (executive mode) — If a TPX switcher is installed in
an open area, where operation by unauthorized personnel may be a problem,
a security lock-out feature can be implemented. When the front panel is
locked, a special button combination is required to unlock the front panel
controller before it can be operated.
Power supply — Includes an internal 100 VAC to 240 VAC, 50/60 Hz, 25 watts
auto-switchable power supply, which provides worldwide power
compatibility.