Command/response table for sis commands, 5 tpx 88 matrix switchers • programmer’s guide – Extron Electronics TPX 88 A User Guide User Manual
Page 63
4-5
TPX 88 Matrix Switchers • Programmer’s Guide
Command
ASCII Command Response
Additional description
(host to switcher)
(switcher to host)
Command/Response Table for SIS Commands
Create ties
1.
Commands can be made back-to-back, with no spaces. For example:
1*1!02*02&003*003%4*6$.
2.
The quick multiple tie and tie input to all output commands activate all I/O switches
simultaneously.
3.
The TPX supports 1-, 2-, and 3-digit numeric entries (1*1!, 02*02!, or 001*001!).
Tie input
X2
to output
X3
, video (V)
X2
*
X3
!
Out
X3
•In
X2
•All
Tie input
X2
’s video and audio
and audio (A)
to output
X3
.
Example:
1*3!
Out03 •In01•All
Tie input 1 V & A to output 3.
Tie input
X2
to output
X3
, video only
X2
*
X3
&
Out
X3
•In
X2
Vid
Audio breakaway.
Example (see Note):
8*4&
Out04•In08•Vid
Tie input 8 video to output 4.
Tie input
X2
to output
X3
, video only
X2
*
X3
%
Out
X3
•In
X2
•Vid
Audio breakaway.
Example (see Note):
7*5%
Out05•In07•Vid
Tie input 7 video to output 5.
The & tie command and the % tie command can be used interchangeably for video on the TPX
switcher.
Tie input
X2
to output
X3
, audio only
X2
*
X3
$
Out
X3
•In
X2
•Aud
Audio breakaway.
Example:
6*7$
Out07•In06•Aud
Tie input 6 audio to output 7.
Quick
multiple tie
Esc
+Q
X2
*
X3
!…
X2
*
X3
! Qik
Example:
Esc
+Q3*4!3*5!3*6!
Qik
Tie input 3 to outputs 4, 5, and 6.
Tie input
to all outputs, V & A
X2
*!
In
X2
•All
Example:
5*!
In05•All
Tie input 5 video and audio to all
outputs.
Tie input
to all outputs, video only
X2
*&
In
X2
•Vid
Example (see Note):
8*&
In08•Vid
Tie input 8 video to all outputs.
Tie input
to all outputs, video only
X2
*%
In
X2
•Vid
Example (see Note) :
4*%
In04•Vid
Tie input 4 video to all outputs.
The & tie all command and the % tie all command can be used interchangeably for video on the
TPX switcher.
Tie input
to all outputs, audio only
X2
*$
In
X2
•Aud
Example:
1*$
In 01•Aud
Tie input 1 audio to all outputs.
Read ties
Read video
output tie
X3
&
X2
Video input
X2
tied to output
X3
.
Example:
3&
1
Video input 1 tied to output 3.
Read video
output tie
X3
%
X2
Video input
X2
tied to output
X3
.
Example:
5%
4
Video input 4 tied to output 5.
The & read tie command and the % read tie command can be used interchangeably for video on
the TPX switcher.
Read audio
output tie
X3
$
X2
Audio input
X2
tied to output
X3
.
Example:
7$
7
Video input 7 tied to output 7.