Extron Electronics TPX 88 A User Guide - Manual (Page 44)

Operation, cont’d
TPX 88 Matrix Switchers • Operation 3-18
3 . Press and release the Input 1 button (figure 3-30).
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
I
N
P
U
T
O
U
T
P
U
T
I
N
P
U
T
O
U
T
P
U
T
ENTER
Press and release the input 1 button to select preset 1.
The button blinks red.
= Blinking button
Preset 9 Preset 10 Preset 11 Preset 12 Preset 13 Preset 14 Preset 15 Preset 16
Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8
= Blinking LED
The Enter button
blinks to indicate
the need to save
the preset.
Figure 3-30 — Select the preset
4 . Press and release the Enter button (figure 3-31). The current configuration is
now stored in memory location 1.
ENTER
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
I
N
P
U
T
O
U
T
P
U
T
I
N
P
U
T
O
U
T
P
U
T
PRESET
All input and output buttons return to unlit or background illumination.
Press the Enter button
to save the preset.
The Enter LED returns to unlit.
The Preset LED returns to unlit.
Figure 3-31 — Press the Enter button
Example 6: Recalling a preset
The following steps show an example in which a preset is recalled to become the
current configuration. Where an explanation is helpful, the steps show the front
panel indications that result from your action.
1 . Press and release the Esc button.
2 . Press and release the Preset button (figure 3-32).
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
I
N
P
U
T
O
U
T
P
U
T
I
N
P
U
T
O
U
T
P
U
T PRESET
The input 1 button lights to indicate that
there is a configuration assigned to preset 1.
Unlit input buttons indicate no preset is assigned to those location.
Recalling an unlit preset clears all ties.
Preset 9 Preset 10 Preset 11 Preset 12 Preset 13 Preset 14 Preset 15 Preset 16
Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8
Press and release
the Preset button.
Figure 3-32 — Select recall preset mode