Extron Electronics TPX 88 A User Guide - Manual (Page 66)

Programmer’s Guide, cont’d
TPX 88 Matrix Switchers • Programmer’s Guide 4-8
Command/response table for SIS commands (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Resets (continued)
Reset audio output levels Esc ZV Zpv Reset all audio output levels
(volume) to 100% (no attenuation).
Reset all mutes Esc ZZ Zpz Reset all audio mutes.
Reset whole switcher Esc ZXXX Zpx Clears all ties and presets, resets
all audio gains to 0 dB, and resets
volume to 100%.
View ties, gain, volume, and presets
View video output tie X3 & X2
Example: 5& 07 Input 7 video tied to output 5.
View video output tie X3 % X2
Example: 7% 02 Input 2 video tied to output 7.
The & read tie command and the % read tie command can be used interchangeably for video on
the TPX switcher.
View audio output tie X3 $ X2
Example: 3$ 06 Input 6 audio tied to output 3.
View input gain X2 G X4
Example: 4G -02 Gain for input #4 is -2 dB.
View output volume X2 V X7
Example: 7V 55 Volume for output #7 is 55%.
View output mutes Esc VM X11
1
X11
2 ... X11
8 Mut Each X11 response is the mute
status of an output, starting from
output 1..
Example: Esc VM 0•0•0•0•2•0•0•0•Mut Output 5 audio is muted. All
other outputs are unmuted.
View global preset configuration Esc X10 VC X2
1
• X2
2
• X2
3
• X2
4
• X2
5
• X2
6
• X2
7
• X2
8
•Vid• X2
1
• X2
2
• X2
3
•...• X2
8
•Aud
Show preset X10 ’s configuration.
Show the video input tied to
each output and then the audio
input tied to each output.
Response description: input # (I#) tied to output # (O#1)•I# tied to O#2...I# tied to O#8•Vid•I# tied to O#1•...I# tied to O#8•Aud
Example: Esc 4VC
1 Output:
Response = tied input:
input 6 video tied to output 2
2 3 4 5 6 7 8 1 2 3 4
03•06•03•04•04•02•02•00•Vid•03•06•03•08•08•04•04•00•Aud
5 6 7 8
no tied video input audio input 8 tied to output 5
Each position shown in the response is an output: left = output 1, right= output 8. The number in each position is the
input that is tied to that output.
Video
— Input 2 is tied to outputs 6 and 7, input 3 is tied to outputs 1 and 3, input 4 is tied to outputs 4 and 5, input 6 is
tied to output 2. No input is tied to output 8.
Audio
— Input 3 is tied to outputs 1 and 3, input 4 is tied to outputs 6 and 7, input 3 is tied to output 2, and input 8 is tied
to outputs 4 and 5. No input is tied to output 8.
Information requests
Information request I V X2 X X3 •A X2 X X3 V X2 X X3 = V size, A X2 X X3 = A Size.
Example: I V08X08•A08X08 8 video and 8 audio inputs by 8
video and 8 audio outputs
(TPX 88 A).
Request part number N xx-xxx-xx See appendix A for part #s.
Example: N 60-542-01 TPX 88 A part # is 60-542-01.
Query firmware version Q X12
Example: Q 1.23 The installed firmware version is
1.23 (sample value only).