Avision @V2800 - Manual (Page 100)

93
5. Click the More Setting tab to prompt the More Setting screen. Check if
you wish to use Delay Send, Polling Reception or the Overseas Mode. (For
more information about the settings, please see the setting descriptions
below.)
6. Press the B&W or the Color button to send your document(s) in black and
white.
Setting Descriptions
Basic
Item
Description
Original Doc. Choice: Simplex, Duplex(Long), Duplex(Short)
Simplex: If your original is a single-sided document,
choose Simplex to scan your documents only in one side.
Duplex(long): If your original is a double-sided
document which is bound along the long edge of paper,
choose Duplex(Long) to scan your document in the front
and the rear side.
Duplex(Short): If your original is a double-sided
document which is bound along the short edge of paper,
choose Duplex(Short) to scan your document in the
front and the rear side.
Quality Choose your favorable quality type.
Choice: Standard, *Fine, Extra Fine, Photo
Standard (200 x 100 dpi): Suitable for most typed
originals.
Fine (200 x 200 dpi): Good for small print.
Extra Fine (200 x 400 dpi): Good for small print or
artwork and transmits slower than Fine resolution.
Photo (200 x 200 dpi): Use when the original has
varying shades of gray.
Original Size Choose your original paper size.
Choice: A4, Letter, Legal. Note: The Legal option is
only for ADF scan.
Image Density If your original document is too light or too dark, you can
use this option to adjust the density level.
Choice: 1, 2, 3, *4, 5, 6, 7