Avision @V2800 - Manual (Page 143)

136
Using the Shortcut Buttons
To use a shortcut button,
1. Set your default working mode to be Shortcut by pressing the User Tools
button and choose Management>Device Management>Default
Mode>Shortcut in succession. Press OK to save the change.
Or you may set the default working mode via the product’s web page and
choose Management>Default Mode>Shortcut. Press Update to save the
change.
Note: Either way will be blocked by a password since this action is only
permitted by a system administrator.
2. Press the Reset button on the control panel. The LCD-display shows the
following Shortcut screen.
3. Choose your desired Shortcut button. The LCD-display will show the memo of
your selected Shortcut button to verify your shortcut.
4. Press the B&W or Color button on the control panel to copy or send your
documents in black and white or in color.