Avision @V2800 - Manual (Page 44)

37
Fax Default: Used to specify the fax default settings.
Item Description
Quality Set default quality type.
Choice: Standard, *Fine, Extra Fine, Photo
Standard (200 x 100 dpi): Suitable for most typed
originals.
Fine (200 x 200 dpi): Good for small print.
Extra Fine (200 x 400 dpi): Good for small print or
artwork and transmits slower than Fine resolution.
Photo (200 x 200 dpi): Use when the original has
varying shades of gray.
Note: Faxes are sent in the specified resolution if that
resolution is supported by the receiving fax machine.
Document
Size
Set default document size.
Choice: A4, Letter, Legal.
Note: The Legal option is only for ADF scan.
Image
Density Adjust the image density in seven steps using the control
panel. And you can specify the default value of image
density in the range of 1 to 7 using Web Page. Increasing
the value makes your scanned image darker and
decreasing the value makes your scanned image lighter.
Set default image density level.
Choice: 1, 2, 3, *4, 5, 6, 7
Polling
Reception
Set default status of polling reception. Choose ON to use
the product to poll other machines. Polling is the process
of retrieving faxes from another fax machine.
Choice: ON, *OFF
Overseas
Mode
Set default overseas mode. Choose ON to avoid
transmission problems when faxing overseas.
Choice: ON, *OFF
*Factory Default