Avision @V2800 User Manual
Page 137
Advertising
130
Assembling Procedure
1.
Take out the ADF pad module from the box.
2.
Press both arms of the ADF snap-in pad inwardly with your two fingers. Place
it into the holes until it snaps into place.
3.
Press both sides of the ADF snap-in pad holder and insert the pins to the holes.
4.
Press down the top of the holder until it snaps into place.
ADF Pad
Holder
ADF Snap-in
Pad
1
2
3
4
ADF Snap-in
Pad Holder
The ADF
Pad Holes
Advertising