Avision @V2800 - Manual (Page 122)

115
Information Messages During Networking
Message Action
The connection has failed.
Please check network settings.
The address is invalid.
Please check network settings.
Network is down.
Please check network settings.
Network is unreachable.
Please check network settings.
Connection aborted by the
server.
Please check network settings.
Connection reset by the
server.
Please check network setting.
Connection timed out.
Please check network setting.
Unable to reach the destination
host.
Please check network settings. Ping the IP address of the product from another
PC in DOS prompt. For example, type “Ping
10.1.20.144” in Dos prompt. If the product has
no response, then perform the following steps.
1. Check if the RJ-45 connector is firmly
plugged-in.
2. Check the Ethernet cable.
3. Check the product’s IP address.
4. Check the destination IP address.
5. Check Subnet Mask.
6. Check Gateway IP.
Failed to connect mail server.
Please check network
environment.
Connection error.
Please check network
environment. Check network environment.
Failed to create socket for
DHCP
Failed to search DHCP server.
Failed to get IP from DHCP
server.
Failed to renew IP from DHCP
server. Check IP address of DHCP server or contact your
network administrator for further help.