Avision @V2800 - Manual (Page 46)

39
Options
Item
Description
Add Phone # Choose ON then the new fax number will be automatically
included in the Phone Book after finishing sending the fax.
Choice: ON, *OFF
Transmission
Report
Choose if you wish to print the fax transmission report. This
report lists the time and date of transmission and whether the
transmission was successful (OK). If you select Yes, the
report will be print after each transmission. If you select
Error, the report will only be printed when a fax fails to
transmit.
Choice: *Yes, No, Error only
Fit to Page Choose Enable to scale the entire contents of your receiving
fax to fit into the paper of the printer. If this setting is
disabled, an incoming image larger than the page splits across
pages.
Choice: *Enable, Disable
Detect Dial
Tone Choose Enable to allow this product to wait for and detect dial
tone before proceeding with dialing. If you are using the
product on the same line as your phone, turn on the detect
dial tone setting. This will prevent the product from sending a
fax while someone is on the phone.
Choice: Enable, *Disable
Detect Busy
Tone Choose Enable to allow this product to detect busy tone when
sending a fax.
Choice: *Enable, Disable (The default setting varies based
on country code.)
Manual
Receive Choose Enable to perform manual receive fax function or
Disable to perform auto receive fax function. “Manual
receive” means when there is an incoming fax and the
machine starts ringing, you need to manually press the Start
button in the Fax working mode to receive and print the fax.
Choice: Enable, *Disable
ECM Mode Choose Enable to perform the “ECM Mode”. The Error
Correction Mode function helps this product to improve
communication in areas where telephone line conditions are
poor.
Choice: *Enable, Disable
*Factory Default