Avision @V2800 - Manual (Page 104)

97
Scanning Your Documents
System Requirements
• IBM compatible PC (Pentium or later);
• Microsoft Windows 2000, Windows XP, Windows Vista
• A USB (universal serial bus) port
• At least 100M bytes of free hard disk space (500 MB is recommended)
• At least 128M bytes of system memory (512 MB of RAM is recommended)
At least 1 GB of RAM for Windows Vista
• A VGA monitor
• A CD-ROM drive
Driver Installation Procedure
Important:
1. To ensure the scan function work properly, please install the scanner driver
FIRST before connecting the USB cable to the computer.
2. The scanner driver contains both TWAIN driver and WIA driver. After the
installation of scanner driver is completed, this scanner allows you to scan
via a TWAIN user interface or a WIA interface. Start your
TWAIN-compatible image editing software application to select a TWAIN or
WIA user interface. Or you might launch Microsoft’s Scanner and Camera
Wizard to scan via WIA user interface.
Installation procedures are as follows:
1. Connect the power cable and turn on your product.
2. Start Microsoft Windows.
3. Insert the supplied CD-ROM into your CD ROM drive.
4. The CD-ROM will auto launch on most systems. However, if your system
does not support auto launching CD-ROMs, press the Start button, choose
RUN, type d:\driver\setup.exe (d: the CD-ROM drive in use), and then click
OK.
5. Follow the on-screen instructions to complete the driver installation.
6. Connect the square end of the USB cable to the USB port of your product.
Connect the rectangle end to the USB port of your computer as illustrated
below.