Replacing the adf roller – Avision @V2800 User Manual
Page 138
Advertising
131
Replacing the ADF Roller
After scanning approximately 200,000 pages through the ADF, the ADF roller may be
worn out and you may experience problems with document feeding. In this case, it
is highly recommended to replace the roller with a new one. Please follow these
steps to replace and install the ADF roller.
1. Pull the ADF Release Button to open the ADF front cover.
2. Move the green clamp up.
3. Hold the roller and slightly move it forward to detach the roller.
Green Clamp
ADF Release Button
ADF Front Cover
Advertising