Avision @V2800 - Manual (Page 83)

76
7. Press the Scan Options tab to prompt the Scan Options screen. Change
the file format and compression level of the scanned image if the default
settings are not satisfactory.
8. Press the B&W button to send your document(s) in black and white, or the
Color button to send your document(s) in color.
Settings Descriptions
Basic
Item
Description
Resolution Choose scanning resolution for your scanned document. The
higher the resolution, the greater details for the scanned
image yet it requires more disk space.
Choice: 75, 100,150, *200, 300, 400, 600 dpi.
Note: If you are scanning duplex (two-sided) paper, the
resolution for color or gray image is up to 300 dpi.
Original
Size Choose your original paper size.
Choice: A4, Letter, A5, B5, Legal. Note: The Legal
option is only for ADF scan.
Image
Density Adjust the image density in seven steps using the control
panel. And you can specify the default value of image
density in the range of 1 to 7 using Web Page. Increasing
the value makes the printouts darker and decreasing the
value makes the printouts lighter.
Choice: 1, 2, 3, *4, 5, 6, 7
Original
Doc. Choice: Simplex, Duplex(Long), Duplex(Short)
Simplex: If your original is a single-sided document, choose
Simplex to scan your documents only in one side.
Duplex(long): If your original is a double-sided document
which is bound along the long edge of paper, choose
Duplex(Long) to scan your document in the front and the
rear side.
Duplex(Short): If your original is a double-sided document
which is bound along the short edge of paper, choose
Duplex(Short) to scan your document in the front and the
rear side.