Avision @V2800 - Manual (Page 45)

38
Fax Settings: Used to specify more fax Settings.
Settings
Item
Description
ID Enter the ID of the product. Up to 32 characters can be entered.
Normally, you can enter your company name in this field. Touch
anywhere on the “ID” field to bring up the soft keyboard to type
your text. The text in this field as well as the station number
(telephone number of the product), the product’s clock including
date and time, the receiving fax number, and page index will be
printed at the top of all outgoing faxes as header information.
Station
Number Enter the telephone number of the product. The Station Number
is the phone number of the line connected to the built-in modem
and the Station Number should be a value not more than 20
characters. Some characters such as “+”, “ ” (blank space) are
supported. The value of the station number will be printed as
part of the fax header information of all outgoing faxes.
Touch anywhere on the “Station Number” field to bring up the soft
keyboard to type your number.
Select Line Select to use the device’s fax telephone line as a direct outside
line (PSTN line) or as an extension (PABX line).
Choice: *Outside, Extension
PSTN Access
No. Enter the number to access the PSTN (Pubic Switched Telephone
Network) line if your device’s fax telephone line is used as an
extension.
For example, enter 0 or 9 in the field via the soft keyboard.
Redial Sets the number of redial attempts if the number dialed is busy.
Choice: 0, 1, *2, 3, 4, 5, 6, 7, 8, 9, 10 (The Redial value 0
indicates no redial.)
Redial
Interval The redial interval setting selects the number of minutes between
each redial if the number dialed is busy.
Choice: 1, 2, *3, 4, 5, 6 minutes.
Ring
Response Lets you set the number of times the phone ring before the fax
answer.
Choice: *1 ring, 5, 10, 15, 20 seconds.
Sound
Volume Use the arrow keys to adjust the sound volume during fax
communication.
Choice: 0, 1, 2, *3
*Factory Default