ALLIED Vision Technologies Pike F-1600 - Manual (Page 14)

Introduction
PIKE Technical Manual V5.1.2
14
continued from last page
V3.2.0 22.08.2007 Minor corrections
Added CE in Chapter Conformity on page 33.
Added Value field in Table 44: CSR: Shutter on page 145.
Added Chapter Cross section: CS-Mount (only PIKE F-032B/C) on
page 62.
Added detailed description of BRIGHTNESS (800h) in Table 147:
Feature control register on page 319
Added detailed description of WHITE-BALANCE (80Ch) in Table
147: Feature control register on page 319 et seq.
Added Appendix, Chapter Sensor position accuracy of AVT cam-
eras on page 378.
Added new frame rates in Chapter Specifications on page 86
Added new AOI frame rates and diagrams in Chapter Frame rates
Format_7 on page 260
New minimum shutter speeds for each of the Pike cameras in
Chapter
Specifications on page 86 and the following
Added new features of PIKE update round:
• SIS: see Chapter Secure image signature (SIS): definition
and scenarios on page 233
• Sequence mode: see Chapter Sequence mode on page 224
• Smear reduction

see Chapter Smear reduction (not Pike F-1100/1600) on
page 235
• 4 x / 8 x binning and sub-sampling modes

see Chapter Binning (only Pike b/w models) on page 170

see Chapter Sub-sampling (PIKE b/w and color) on page
175

see Chapter Binning and sub-sampling access on page 182
• Quick mode for format changes

see Chapter Quick parameter change timing modes on page
184
• Speed increase mode (Packed 12-bit Mode)

Chapter Packed 12-Bit Mode on page 189
• CS-Mount (only for PIKE F-032)

Chapter PIKE F-032B/C (fiber) on page 86 and Chapter
Cross section: CS-Mount (only PIKE F-032B/C) on page 62
to be continued on next page
Version Date Remarks
Table 1: Document history