ALLIED Vision Technologies Pike F-1600 - Manual (Page 16)

Introduction
PIKE Technical Manual V5.1.2
16
continued from last page
V4.1.0 20.08.08 Added PIKE F-505 to Chapter Index on page 381
Revised formulas by adding some units in Chapter How does
bandwidth affect the frame rate? on page 288
Corrected Table 172: Advanced register: Channel balance on
page 352
Added Max IsoSize Bit [1] to register 0xF1000048 ADV_INQ_3 in
Table 153: Advanced register: Advanced feature inquiry on page
331f.
Added Chapter Maximum ISO packet size on page 355 (useful for
PIKE F-505 for higher frame rates)
Corrected Figure 104: Former standard timing on page 184
Added photos of 1394b locking connectors and 1394a Molex
clamp locking (aka Interlock) connectors in Chapter
1394a and
1394b cameras and compatibility on page 39.
Added recommendation to use PCI-X (64 bit) or PCI Express
adapter in Chapter
Maximum ISO packet size on page 355.
Corrected frame rate formula in Chapter High SNR mode (High
Signal Noise Ratio) on page 190.
Corrected binning order in Chapter 2 x full binning/4 x full bin-
ning/8 x full binning on page 174.
Added block diagram of modern PC (X38 chipset by INTEL) in Fig-
ure 5: Block diagram of modern PC (X38 chipset by INTEL) on
page 39
Revised FireWire hot-plug precautions and added screw-lock pre-
cautions in Chapter
FireWire hot-plug and screw-lock precau-
tions on page 44
Added images of FireWire locking cables in Figure 4: 1394a and
1394b cameras and compatibility on page 39
Added list of available FireWire screw lock cables in Table 4: 1394
locking cables on page 35
Corrected CAD drawing in Figure 12: Pike W90 S90 (2 x 1394b
copper) on page 56
Changed provisions directive to 2004/108/EG in Chapter Confor-
mity on page 33
Corrected diag. (16.3 mm) of KAI2093 in Table 18: Specification
PIKE F-210B/C (fiber) on page 92
to be continued on next page
Version Date Remarks
Table 1: Document history