ALLIED Vision Technologies Pike F-1600 - Manual (Page 193)

Description of the data path
PIKE Technical Manual V5.1.2
193
The following screenshot shows the sequence of commands needed to work with
deferred mode.
For a description of the commands see the following table:
Figure 106: Example: Controlling deferred mode (SmartView - Direct Access; PIKE F-032C)
# rw Address Value Description
10 rd F1000260 82006900h Check how many images are left in FiFo
9 wr F1000260 86006901h Read out the second image of FiFo
8 rd F1000260 82006901h Check how many images are left in FiFo
7 wr F1000260 86006901h Read out the first image of FiFo
6 rd F1000260 82006902h Check that two images are in FiFo
5 wr F0F0061C 82000000h Do second one-shot
4 wr F0F0061C 82000000h Do first one-shot
3 wr F1000260 82006900h Switch deferred mode on
2 rd F1000260 80006900h Check pres. of deferred mode and FiFo size (69h  105 frames)
1 wr F0F00614 00000000h Stop continuous mode of camera
Table 62: Example: Controlling deferred mode (SmartView - Direct Access; PIKE F-032C)